Sony HDVF-C35W, Руководство по обслуживанию

Страница: 19 / 62

2-3 (E)
HDVF-C35W
2-3. OPERATION Menu
The OPERATION menu contains the setting items required when the camera operator is using the device.
For more information, refer to the operation manual that comes with this device.
2-4. SERVICE Menu
The SERVICE menu contains items required for maintaining this unit, such as electrical alignment,
HOURS METER, and self-diagnosis function.
m
.
The next menu item may not be selectable depending on the current menu item setting.
.
“
___
” is displayed as the parameter for unselectable items.
Page Menu Items Setting ( indicates the default) Function
S01 * 1 COLOR ADJUST BIAS R _ 512 to
[1]
to 511 Adjusts the black level color
TEMP
ADJUST BIAS G _ 512 to
[1]
to 511
temperature.
ADJUST BIAS B _ 512 to
[1]
to 511
ADJUST GAIN R 0 to
[128]
to 255 Adjusts the white level color
ADJUST GAIN G 0 to
[128]
to 255
temperature.
ADJUST GAIN B 0 to
[128]
to 255
S02 GAMMA/ GAMMA SELECT
[1]
Switches the gamma table
KNEE Currently, only 1 is valid.
KNEE POINT 0 to
[237]
to 255 Sets the knee point level.
KNEE SLOPE 1/2, 1/3,
[1/4]
, CLIP Sets the knee slope level.
S03 PEAKING FREQUENCY L,
[M]
, MH, H Sets the center frequency of the
peaking signal.
SOURCE NAMY,
[Y]
, RGB Sets the video signal that makes
the peaking signal.
B MIX GAIN
[0|dB]
, _ 6 dB, _ 12 dB, _ 18 dB Sets the mix gain that mixes the
peaking signal to the B ch.
CRUMPLE 0 to
[1]
to 3 Sets the bit shift for crumpling
the peaking signal.
RGB MIX
[R]
, G, B, CY, MG, YL, Sets the mix gain for R ch, G ch,
SKIN, SKY, FOIL, ORAN and B ch when mixing the
peaking signal to the main signal.
This setting is enabled only
when RGB is selected in
SOURCE.
CRISPENING
[0]
to 63 Sets the level for crispening the
peaking signal.