Sony HDVF-C35W, Руководство по обслуживанию

Страница: 18 / 62

2-2 (E)
HDVF-C35W
VF MENU
05 MAGNIFICATION
MAGNIFICATION : OFF
POSITION : CNT
AUTO RELEASE : AUTO
MAG PEAKING : OFF
PEAKING LEVEL: ---
mark
VF MENU
05 MAGNIFICATION
MAGNIFICATION : OFF
POSITION : CNT
AUTO RELEASE : AUTO
MAG PEAKING :? OFF
PEAKING LEVEL: ---
5. Enter the setting.
Push the ENTER switch.
The setting is entered and the menu returns to item
select mode.
If you push the ENTER switch before pushing the MENU
switch, the setting returns to the value that was previously
set and then the menu returns to item select mode.
6. Set other menu items.
Repeat steps 2 to 5 to set other menu items.
7. End menu operations.
Push the MENU switch repeatedly until the menu page
disappears from the display.
To restore a setting to its initial value
Move the
→
mark to the menu item to be restored, and
then push the ASSIGN 1 and ASSIGN 2 switches at the
same time while the ? mark is positioned to the left of the
setting (value setting mode).
2-2. TOP Menu
The TOP menu displays all of the menu items.
Displaying the TOP Menu
1. Set the control knob on the front to the following settings.
(1) BRIGHT knob:
99 (Turned fully clockwise)
(2) CONTRAST knob:
_
99 (Turned fully counter-
clockwise)
(3) PEAKING knob: 100 (Turned fully clockwise)
2. Press the ENTER switch while holding down the
MENU switch.
The TOP menu is displayed.
TOP MENU screen
Menu items Contents
OPERATION Contains the setting items required when the
camera operator is using the device.
SERVICE Contains items required for maintaining the
View Finder, such as electrical alignment,
HOURS METER, and self-diagnosis function.
3. Select menu items.
(1) With the
→
mark is positioned to the left of a
menu item on the selected menu page (item
select mode), push the ASSIGN 1 or ASSIGN 2
switch to move the
→
mark to the desired menu
item.
To move the
→
mark upward, push the ASSIGN
1 switch. To move the
→
mark downward, push
the ASSIGN 2 switch.
Item select mode
(2) Position the
→
mark to the left of the desired
menu item, and then push the ENTER switch.
The
→
mark to the left of the selected menu item
changes to the mark, and the mark to the
left of the setting changes to the ? mark. The
menu is replaced by setting screen (value setting
mode).
Value setting mode
To select another menu item, push the MENU switch
to return to item select mode.
4. Change the value of a setting.
With the ? mark positioned to the left of the setting
(value setting mode), push the ENTER switch to
change the value.
If the setting is a numerical value, push the ASSIGN
1 switch to increase the value, and push the ASSIGN
2 switch to decrease the value.
Keep pushing the switch to change the value rapidly.
VF MENU
<TOP MENU>
OPERATION
SERVICE