2-9
VPL-ES7
2-7. Others
2-7-1. Note When Replacing the Main Board
The new Main board of VPL-ES7 is shipped with the 3D Gamma set to OFF.
After replacing the Main board and upon completion of adjustment, set the 3D Gamma setting to ON.
For the VPL-EX7/EX7IN/EX70, the following work is not necessary since the projector is shipped from
the factory with the 3D Gamma set to ON.
1. Enter the Factory Mode and display page 1.
2. Move the cursor to DELUT SW.
3. Operate
the
[*]
key and set the 3D Gamma setting to ON.
How to Enter the Factory Mode
1. Power on the projector.
2. Push the switches on the remote controller or controller panel as below.
[Enter]
→
[Enter]
→
[&]
→
[PIC|MUTING]
key
3. Factory mode menu will appear on the screen.
n
In the factory mode, do not enter any items except the speci
fi
ed one because the data cannot be returned
back to the original value if it is changed once.
TGHST Phase Hi
TGHST Phase Lo
SHSH1
TGHST Position
DEHPF On
DEHPF AAC
DEHPF TAP
DEUSC On
3D GammaSubCont
3D GammaSubBrt
DELUT SW
DEUF SW
0
111
31
18
ON
ON
3
OFF
8
50
OFF
ON
P1-1
CXD9809-page1
