24
Adjusting the Position
Adjusting the Position
Before moving the camera with the viewfinder attached,
always pull the viewfinder up to the standard position and
push the tilt-lock/friction adjustment lever towards the
camera lens to lock the viewfinder. Also, check to be sure
that lift-lock release knob 1 is locked in the “LOCK”
position.
Adjusting the Height
1
To unlock the lifting mechanism, turn the lift-lock
release knob 1 towards “RELEASE” until it will not
go further.
2
Holding the viewfinder firmly, pull the lift-lock
release knob 2 and move the viewfinder to the
standard position, middle position 1, middle position
2, or low position.
There is an audible click when the viewfinder snaps
into the position.
3
Be sure to always turn the lift-lock release knob 1
towards “LOCK” to lock the lifting mechanism.
The viewfinder snaps into place at the standard position,
middle position 1, middle position 2, or low position.
Note
Lift-lock release knob 2
Lift-lock release knob 1
Standard position
Middle position 1
Low position
Middle position 2
Note
