Using the Menu
29
5
Enter the setting.
Press the MENU control.
The setting is entered and the menu returns to item
select mode.
If you press the MENU switch before pressing the
MENU control, the setting returns to the value that
was previously set and then the menu returns to item
select mode.
6
Set other menu items.
Repeat steps 2 to 5 to set other menu items.
7
End menu operations.
Press the MENU switch repeatedly until the menu
page disappears from the display.
Restoring a setting to its initial value
Move the
c
mark to the menu item to be restored, and then
press the MENU control for 2 seconds or more.
List of Menu Items
• Some settings cannot be selected unless the previous
menu item is set to “ON.”
• “– – –” appears to the left of settings that cannot be
selected.
Notes
No.
Page
Menu item
Settings
(default in
[ ]
)
Description
01
FUNCTION
ASSIGN. 1
RESP/KNEE/
PRST/
[MONO]
/
MAG
Assigns a function to the ASSIGN. 1 switch.
RESP
: Toggles RESPONSE MODE between A and B
KNEE
: Toggles the KNEE correction circuit ON or OFF
PRST
: Toggles PRESET between ON and OFF
MONO
: Toggles the display between color or
monochrome
MAG
: Toggles the display between normal and
magnified
Fine adjustments can be made for each function on the
various menu pages.
ASSIGN. 2
RESP/KNEE/
PRST/MONO/
[MAG]
Assigns a function to the ASSIGN. 2 switch (the
assignable functions are the same as those for ASSIGN.
1).
KNEE
[OFF]
/ON
Turns the knee correction circuit ON or OFF.
MONOCROME
[OFF]
/ON
Selects the color picture (OFF) or monochrome picture
(ON).
FRAMERATE
CONV
[OFF]
/ON
Activates (ON) or deactivates (OFF) the function that
converts the 48 Hz or 50 Hz frame frequency of an input
signal to 60 Hz. When “ON,” movements may seen
unnatural, depending on the scene.
02
TALLY/IND
UP TALLY
OFF/
[ON]
Controls the external tally lamp.
OFF
: Tally lamp off (Stays off even when the camera
receives a red tally signal.)
ON
: Tally lamp on
UP TALLY DIM
1 to
[5]
to 10
Adjusts the brightness of the external tally lamp. Raising
the value increases the brightness; lowering the value
decreases the brightness.
TALLY/IND
OFF/
[ON]
Activates all tally lamps and indicators on the front panel
(ON) or activates the BATT indicator only (OFF).
TALLY/IND DIM
[LOW]
/HIGH
Sets the brightness of the tally lamps on the front of the
viewfinder, the BATT indicator and the
indicator that
appear on the screen.
