Adjusting the Position
25
Tilting
1
Pull the tilt-lock/friction adjustment lever towards the
back of the camera to set the desired tilt friction.
2
Adjust the tilt angle.
Tilting range:
+90º to –90º (depending on the
adjusted height of the viewfinder)
For details, see the figure on page 24.
3
Push the tilt-lock/friction adjustment lever towards
the camera lens to lock the viewfinder’s position.
Panning
1
Turn the pan-lock/friction adjustment lever towards
“RELEASE” to set the desired panning friction.
2
Grasp the viewfinder and turn it to the desired
position.
3
Turn the pan-lock/friction adjustment lever towards
“LOCK” to lock the viewfinder’s position.
Depending on the camera that is connected, the viewfinder
may strike the camera handle during panning. If the
position of the handle cannot be changed, change the
position of the viewfinder’s mounting wedge.
For details, see “Changing the position of the mounting
wedge” on page 26.
Note
