14
2-13.
GEARS INSTALLATION
1
Slide the slider (u/d)
fully in the arrow
direction.
3
Gear (gear B)
2
Gear (U/D slider)
4
Gear (gear A)
Portion A
Adjust the gear (gear B) with the
portion A as shown.
Slider (U/D) gear
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.
Gear
(gear B)
Linearly
Adjust so as to be aligned with
gear B linearly, as shown.
2-14.
SLIDER (SELECTION) INSTALLATION
2
Gear (chuking)
6
Two screws
(PTPWH M2.6)
5
Washer
3
Convex portion of
slider (selection)
4
Compression spring
7
Insert the slider (selection)
into the portion A.
1
Rotary encoder
Rotary encoder
Align with the slot of
rotary encoder.
Align marking
Portion A
Gear (chuking)
Insert a convex portion into
a groove of gear (chuking).