13
2-11.
TRAY (SUB)
1
Rotating the pulley (LD), shift the slider (selection) in the arrow
A
direction.
2
Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3
Rotating the pulley (LD), shift the slider (selection) in the arrow
B
direction.
4
Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.
A
B
Pully (LD)
Stocker section
Tray (sub)
Slider (selection)
Pully (mode)
2-12.
CHASSIS (MOLD B) SECTION, STOCKER SECTION AND SLIDER (SELECTION)
Note:
In mounting the parts, refer to page 14 and 15.
5
Stocker
section
4
Two step
screws
4
Two step screws
3
Gear (eject)
2
Chassis (mold B) section
9
Compression
spring
7
Slider (selection)
8
Washer
6
Two screws
(PTPWH M2.6)
1
Three screws
(BVTP M2.6)
Pully (LD)
Note: Rotating the pully (LD),
shift the slider (selection)
to the left.