When you start HAP Music Transfer subsequently, the steps below will differ since
the wizard does not appear. Set up the Connection window, Contents Settings
window and Transfer Settings window manually to transfer the file(s).
1. Start HAP Music Transfer.
The setup wizard starts and the Connection window appears.
2. Select the HDD AUDIO PLAYER you want to connect to, and then select [Next]
(Windows) or [Continue] (Mac).
The Contents Settings window appears.
3. Select [Add] to select the folder in which music files are stored, and then select
[OK] (Windows) or [Add folders] (Mac).
File formats that are supported by the connected HDD AUDIO PLAYER are
listed at the bottom of the Contents Settings window.
4. Check the check boxes of file formats you want to transfer, and then select
[Next] (Windows) or [Continue] (Mac).
The Transfer Settings window appears.
5. Select [Start] beside [Manual Transfer].
A progress bar appears and the file transfer starts.
When the file transfer is completed, select [Finish Wizard]. The window changes
back to the Connection window.
Music file management on the HDD AUDIO PLAYER
The HDD AUDIO PLAYER registers music information obtained from music files
when you transfer them to the HDD AUDIO PLAYER.
The HDD AUDIO PLAYER utilizes music information about the album name, album
artist name, album art image, track name, track artist name, track number and track
genre from each music file.
The method of embedding music information differs depending on the music file
management software or tag editing software.
Music information is classified on the list screen of the HDD AUDIO PLAYER as
follows.
Genres
: Displays the track genre in [Genres].
Artists
: Displays the track artist name in [Artists].
Albums
: Displays information composed of the album name and album artist name
in [Albums].
