Sony Handycam Vision DCR-TRV5, Руководство по обслуживанию

Страница: 124 / 165

5-45
3. S-C Output Level Adjustment (VC-207 Board)
Set the chroma signal level of the S video output signal.
Mode VTR stop
Signal No signal
Measurement Point Chroma signal terminal of S VIDEO
jack (75
Ω
terminated)
Measuring Instrument Oscilloscope
Adjustment Page D
Adjustment Address 94
Specified Value A = 286 ± 6 mV (NTSC)
A = 300 ± 6 mV (PAL)
Note 1:
Insert a plug in the S VIDEO jack.
Note 2: Perform “Composite Output Y Level Adjustment” and “Composite
Output Chroma Level Adjustment” before this adjustment.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 94, change the data and set the burst
signal level (A) to the specified value.
3) Press the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
Fig. 5-3-10
A
H
4. S-Y Output Level Adjustment (VC-207 Board)
Set the Y signal level of the S video output signal.
Mode VTR stop
Signal No signal
Measurement Point Y signal terminal of S VIDEO jack
(75
Ω
terminated)
Measuring Instrument Oscilloscope
Adjustment Page D
Adjustment Address 95
Specified Value A = 286 ± 6 mV (NTSC)
A = 300 ± 6 mV (PAL)
Note:
Insert a plug in the S VIDEO jack.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 95, change the data and set the sync
signal level (A) to the specified value.
3) Press the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
Fig. 5-3-11
A
H