Sony GXDL52H1 - 52" LCD Flat Panel Display, Руководство пользователя

Страница: 74 / 311

26
GB
Multi Display
Allows you to make settings for connecting multiple displays to form a video wall.
“Multi Display”
“Off”: Uses a single screen.
“2×2”/“3×3”/“4×4”: Sets to connect multiple displays such as 2, 3 or 4 displays
both vertically and horizontally.
“1×2”/“1×3”/“1×4”: Sets to connect multiple displays such as 2, 3 or 4 displays
horizontally.
“2×1”/“3×1”/“4×1”: Sets to connect multiple displays such as 2, 3 or 4 displays
vertically.
“Position”: Select the position of each display in the arrangement of the video wall
with F / f / G / g . Press to set the position.
“Output Format”: Selection of two picture output formats will be available as
shown in the figures. By simply selecting either format, suitable picture output will
be available without manually adjusting the horizontal and vertical shift. Select
either “Tiles” or “Window”.
Available combination of two pictures
1) Supported when “Display” is set to “YUV” or when “Option” is set to “RGB” in “RGB/YUV”.
2) Supported when “Display” is set to “RGB” or when “Option” is set to “YUV” in “RGB/YUV”.
Tip
Output from BKM-FW50 is considered as RGB output shown in the table in the “PAP” mode.
S Video Video
RGB/YUV
DVI HDMI
OPTION
RGB Component RGB Component HDMI
HD-SDI/
SDI
S Video
a a a a a a a a
Video a a a a a a a a
RGB/YUV
RGB a a a a a
2)
a a
Component a a a a a
1)
a a
DVI
a a a a a a
HDMI a a a a a a
To show full signal on
each display. To show one large picture with
multi display naturally.
Part of the signal will go behind
the bezel area.
“Tiles” “Window”