NAC-HD1E.GB.3-213-271-11(1)
1
GB
Transferring tracks to a PSP
1
Connect the PSP to the USB
connecting jack on the unit.
2
Set the connected PSP to the USB
connecting mode.
Refer to the PSP operating manual for
the respective procedure.
3
Enter the Function menu and select
[HDD JUKEBOX].
Make sure the TRANSFER button is set
to PSP (page 46).
4
Press TRANSFER on the remote
control or the unit.
5
Select [Setting].
You can specify the destination group
in the PSP and the transfer format for
Linear PCM tracks.
6
Select [Select group at destination],
and then select the destination group
from the pull-down menu.
New group
A new group is created
and the selected tracks
are transferred to it.
Select group at
destination
The selected tracks
are transferred to an
existing group.
(
Factory setting)
7
If you are transferring Linear PCM-
format tracks, select [Conversion
system], and then select the desired
item from the pull-down menu to
convert the tracks to a transferable
format.
If you are transferring tracks in another
format, go to step 9.
Auto
The unit automatically
selects and transfers audio
data with a format that can
be played on the connected
device.
Select
format
Use this item to select the
format and bit rate in step 8.
(
Factory setting)
8
If you selected [Select format] in step
7, select the format and bit rate from
the [Format] and [Bit rate] pull-down
menus.
9
Select [Close].
10
Select the playlists or tracks that you
want to transfer.
11
Select [Execute] or press TRANSFER.
