NAC-HD1E.GB.3-213-271-11(1)
1
GB
Setting the clock through an Internet
connection
— NTP
You can set the clock by connecting the
unit to the NTP (Network Time Protocol)
server on the Web.
Before using this function, make sure the
network setup has already been done (page
82).
1
Enter the Setup menu, select [Clock
setting], and then press ENTER.
The clock setting display appears.
2
Select [Online auto-sync clock setting]
and press ENTER.
3
Select [On] and press ENTER.
4
Select [Server name] and press ENTER.
The text input display appears.
If [NtpServer] appears, the unit
connects to the server that has been set.
If the server name is okay, go to step 6.
5
Enter the server name and press
ENTER.
For details on entering text, see
“Entering text” on page 15.
6
Select the desired city from the [Time
zone] setting.
If the desired city does not appear
in the [Time zone], select a city that
is within the same time zone as the
desired city.
7
Select [Standard] or [Summer time]
for the [Summer time] setting.
8
Select [Apply] and press ENTER.
The clock is automatically set.
9
Select [Close] and press ENTER.
To restore the server name to its
factory setting
In step 5, press the CLEAR button
repeatedly until the server name is deleted.
To cancel the procedure
Press BACK.
Notes
The unit may not be able to connect to the NTP
server if the Internet setting has not been correctly
done.
If you are using a proxy server, transmissions may
not be relayed to the NTP server. If this happens,
consult your Internet service provider.
