Sony EXWAVEPRO SNC-CM120, Руководство по обслуживанию

Страница: 11 / 64

1-5
SNC-CS20/CM120
1-4-2. PS-757/757A Board
1. Remove the lens. (Refer to Section 1-2.)
2. Remove the upper case. (Refer to Section 1-3-1.)
3. Remove the rear assembly. (Refer to Section 1-3-2.)
4. Remove the front assembly. (Refer to Section 1-3-3.)
5. Remove the four screws, then remove the PS-757/
757A board.
6. Disconnect the four harnesses from the connectors
(CN1 to CN4) on the PS-757/757A board.
7. Remove the screw, then remove the lens holder in the
direction of the arrow.
8. To install, reverse the removal procedure.
n
When attaching, align the two dowels of the lower
chassis with the two holes of the PS-757/757A board.
1-4-3. CN-3107 Board
1. Remove the lens. (Refer to Section 1-2.)
2. Remove the upper case. (Refer to Section 1-3-1.)
3. Remove the rear assembly. (Refer to Section 1-3-2.)
4. Remove the two screws (PTP2
x
5) and the two screw
(PSW2
x
5).
5. Remove the hook, then remove the CN-3107 board.
6. To install, reverse the removal procedure.
n
When attaching, align the two dowels of the rear
assembly with the two holes of the CN-3107 board.
PS-757/
757A board
CN1
CN3
CN4
CN2
PSW2
x
5
PSW
2
x
5
Dowel
Dowel
Harnesses
Harnesses
Lens holder
Hole
Hole
Lower chassis
PTP2
x
5
PSW2
x
5
Hook
CN-3107 board
Rear assembly
Dowel
Dowel
Hole
Hole