6
GB
Notes about moving the lift unit up/down
• The lift unit moves up and down
automatically when the system is
turned on/off, and when the input is
switched with “AUTO” selected in
“Lift Mode” (page 74). You can also
make the lift unit move up/down by
pressing .
• To prevent operational mistakes, this
system features a “LOCK” function
(page 74).
• When connecting other components to the side of the
system (e.g., AV 4 connections), make sure not to place
any cords under the lift unit to avoid trapping them as the
lift unit moves.
• Do not touch the lift unit (especially the circled areas in
the right illustration) while it is moving. Especially, watch
out for small children.
• Do not operate this system while the lift unit is moving.
Medical institutions
Do not place this system in a
place where medical equipment is
in use. It may cause malfunction
of medical instruments.
Carrying
• Before relocating the system,
perform the procedure in “On
moving the system” (page 9), then
disconnect all the cables from the
system.
• When you carry the system by hand,
hold the system as illustrated on the
right. If you do not do so, the system
may fall and be damaged or cause serious injury. If the
system has been dropped or damaged, have it checked
immediately by qualified service personnel.
• When transporting it, do not subject the system to jolts or
excessive vibration. The system may fall and be damaged
or cause serious injury.
• When you carry the system in for repair or when you move
it, pack it using the original carton and packing material.
• Carrying the system requires two or more people.
Ventilation
• Never cover the ventilation holes
in the cabinet. It may cause
overheating and result in fire.
• Unless proper ventilation is
provided, the system may gather
dust and get dirty. For proper
ventilation, observe the
following:
– Do not install the system turned backwards or
sideways.
– Do not install the system turned over or upside down.
– Do not install the system on a shelf or in a closet.
– Do not place the system on a rug or bed.
– Do not cover the system with cloth, such as curtains, or
items such as newspapers, etc.
• Never install the system as follows:
Ventilation holes
• Do not insert anything in the ventilation
holes, gaps between the TV screen and the
lift unit or the disc slot. If metal or liquid
is inserted in these holes, it may result in
fire or electric shock.
• If anything falls into the cabinet, unplug
the unit and have it checked by qualified
personnel before operating it any further.
• Do not block the ventilation slots by putting anything on
the system. The system is equipped with a high power
amplifier. If the ventilation slots are blocked, the unit can
overheat and malfunction.
Placement
• Do not obstruct the area where the lift unit moves up and
down. It may cause a malfunction. Leave some space
around the system. Otherwise, air-circulation may be
inadequate and cause overheating, which may cause fire
or damage to the system or the lift unit.
• Never place the system in hot,
humid or excessively dusty places.
• Do not install the system where
insects may enter.
Air circulation is
blocked.
Air circulation is
blocked.
Wall
Wall
30 cm
Leave at
least this
much
space.
10 cm
10 cm
Do not place any objects under the area
where the lift unit moves up/down.
