74
GB
• When you connect headphones, the lift unit will stop
moving. And will not move even if you press
until
you disconnect the headphones.
• When connecting other components to the system, make
sure not to trap any cords in the lift unit.
Moving the lift unit automatically (AUTO)
The lift unit can be moved automatically, according to
the selected input or system power on/off. See the
table below.
Tip
Even in AUTO mode, you can move the lift unit up and down
by pressing
. The lift unit moves in the same way with
the MANUAL mode.
Note
The lift unit will automatically move when the system is
activated with “AUTO” set in “Lift Mode,” and in the
following situations:
– [On Time] in [Timer]
– [Off Time] in [Timer]
– other than [Off] in [Sleep Timer]
– no signal from TV
– no input signal from a connected PC.
Moving the lift unit manually (MANUAL)
The lift unit can be moved manually by pressing
on the system or remote. The lift unit moves up or
down accordingly. See the table below.
Note
When the lift unit is completely up, you cannot use OSD-
related functions, and “NOT IN USE” appears in the front
panel display. In this case, press
to move the lift unit
down.
Locking the lift unit (LOCK)
The lift unit will not move, even if you press
. It is
recommended setting this mode if you have small
children.
Operation:
Direction
Turn off system
up
Turn on system (except
FM function)
down
Turn on system (FM
function)
up
FM function
up
Except FM function
down
Status:
Press
to
move
completely down
up
moving up
down
completely up
down
moving down
up
