Sony DXC-S500, Руководство по обслуживанию

Страница: 13 / 148

1-3
DXC-S500 (E)
1-3. Removal and Installation of Cabinet
1-3-1. CHU Block
1. Turn the lens cap in the direction indicated by the
arrow, then remove the lens cap.
2. Remove the four screws, then remove the lower case.
3. Remove the three screws, then remove the front panel
assembly.
4. Disconnect one flexible flat cable from the connector
(CN101) on the CA-46 board.
5. Remove the harness guard.
6. Attach the front panel assembly and lower case in the
reverse order of steps 1 to 5.
1-3-2. CCU Block
1. Remove the four screws, then remove the upper case
assembly.
2. Disconnect the two flexible flat cables from the
connectors (CN3 and CN5) on the SW-1082 board and
disconnect one harness from the connector (CN107)
on the CN-2272 board.
PM 2
x
5
CN101
Harness guard
Flexible flat cable
Lens cap
Front panel assembly
PM 2
x
5
PM 2
x
5
CA-46 board
Lower case
B 2.6
x
4
B 2.6
x
4
Upper case assembly
Flexible
flat cables
CN5
CN3
CN107
SW-1082 board
CN-2272 board Harness