Sony DXC-S500, Руководство по обслуживанию

Страница: 16 / 148

1-6
DXC-S500 (E)
1-4-3. PD-106 Board
1. Remove the upper case assembly. (Refer to Section 1-
3-2.)
2. Disconnect one harness from the connector (CN5) and
three flexible flat cables from the connectors (CN1,
CN2 and CN3) on the PD-106 board.
3. Remove the two screws (B 2.6
x
4) and two screws
(BTP 2.6
x
6), then remove the PD-106 board.
4. Install the PD-106 board in the reverse order of steps 1
to 3.
1-4-4. SW-1082 Board
1. Remove the upper case assembly. (Refer to Section 1-
3-2.)
2. Disconnect the three flexible flat cables from the
connectors (CN1, CN2 and CN4) on the SW-1082
board.
3. Remove one screw (BTP 2.6
x
8), then remove the
wiring clip.
4. Remove the eight screws (B 2.6
x
4), then remove the
SW-1082 board.
5. Remove the four volume knobs from the SW-1082
board.
6. Install the SW-1082 board in the reverse order of steps
1 to 5.
BTP 2.6
x
6
B 2.6
x
4
Upper case
assembly
Harness
CN5
CN1
CN3
CN2
PD-106
board
Flexible flat cables
Flexible flat cable
B 2.6
x
4
BTP
2.6
x
8
B 2.6
x
4
CN4
CN2
CN1
SW-1082
board
Flexible flat cable
Flexible
flat cable
Wiring clip
Volume
knobs
Flexible
flat cable