background image

12

Troubleshooting

A battery is inserted, 
but the indicator 
does not light.

The battery is fully 
discharged.

Recharge the battery.

The power switch on the 
receiver is turned off.

The indicator is designed to light in 
accordance with the power switch 
on the receiver. Turn on the power 
switch.

A power supply is 
connected to DC IN.

When a battery and DC IN are 
connected at the same time, the 
DC IN power supply is used. If you 
want to use the battery power, 
disconnect the DC IN power supply.

Audio cannot be 
heard from the 
headphones 
connected to the 
OUTPUT 1/2 
connector.

The monitor volume 
adjuster is set to a low 
level.

Adjust the volume.

The output selector switch 
is set to MIC LEVEL.

Set the output selector switch to 
PHONES.

Audio cannot be 
heard from the 
recorder connected 
to the OUTPUT 1/2 
connector, or the 
audio is distorted.

The output selector switch 
is set to PHONES.

Set the output selector switch to 
MIC LEVEL.

Audio is not output 
from the right 
channel of the 
OUTPUT 1/2 
connector.

Tuner 2 of the DWR-S01D 
is not turned on.
Alternatively, a WRR-855S 
is connected.

Check the power switch on the 
DWR-S01D.
As the WRR-855S is a single 
channel receiver, output is only 
possible from tuner 1 (i.e., the left 
channel).

Symptom

Meanings

Remedy

Содержание DWA-F01D
















Отзывы: