Chapter 5 Menu Settings
52
GB
Chapter 5
Menu Settings
Menu Organization
Menu options
AUTO OFF
AUTO REWIND
INDEX WRITE
CASSETTE MEMORY SEARCH
CASSETTE MEMORY ERASE
PHOTO PB
DV EE OUT
DISPLAY POSITION
CAUTION DISPLAY
BEEP
TIME CODE
(DSR-40 only)
PREROLL TIME SELECT
AFTER CUE-UP
PB STILL DELAY
RECORDER MODE
STILL TIMER
Set this option to
ON
OFF
ON
OFF
AUTO
OFF
AUTO
OFF
ALL DATA
INDEX DATA
DATE DATA
PHOTO DATA
FIELD
FRAME
ON
OFF
CENTER
LOWER RIGHT
OFF
ON
OFF
ON
OFF
AUTO
NDF
DF
3SEC
5SEC
7SEC
10SEC
STOP
STILL
0FRAME –
10FRAME
NORMAL PLAYER
FXE RECORDER
8SEC – 4MIN
Description of settings
• To turn off the VCR automatically if there is no operation and the tape
stops for an hour (Auto Off).
• To deactivate Auto Off.
• To rewind the tape to its beginning automatically if the tape reaches to
an end (Auto Rewind).
• To deactivate Auto Rewind.
• To record index signals when recording begins.
• Not to record index signals.
• To search recordings with the cassette memory. If the tape does not
have a cassette memory, the VCR will search recordings using index
signals recorded on the tape itself.
• To search recordings using the index signals recorded on the tape.
• To erase all the data in the cassette memory. (When using the
cassette whose memory can store over 16 Kbits of data, you can only
select ALL DATA.)
• To erase index data in the cassette memory.
• To erase date data in the cassette memory.
• To erase photo data in the cassette memory.
• To prevent the picture from blurring when playing a tape recorded in
photo mode.
• To see a clear picture when playing a still picture.
Note
When selecting FRAME, a picture recorded in photo mode may be blurred.
• To output the selected line input signals from the DV jack.
• To output only playback video and audio signals from the DV jack.
• To display the tape counter in the center of the monitor screen.
• To display the tape counter in the lower right of the monitor screen.
• Not to display the tape counter.
• To display alarm messages on the monitor screen.
• Not to display alarm messages.
• To output a beep sound when an illogical operation is made.
• To deactivate the beep.
• To set the time code to the same one as already recorded on the
tape.
• To set the time code to Non Drop Frame.
• To set the time code to Drop Frame.
Note
If you use AUTO and start recording at the beginning of the tape, the
time code is set to Non Drop Frame.
The preroll time can be set between 3 and 10 seconds by four steps.
When an editing controller such as the PVE-500 has been connected,
this setting is disabled and the editing controller’s setting is in effect.
The preroll time setting is also performed on the editing controller.
• After a cue-up, the unit informs the editing unit that it is in stop mode.
(The unit is actually in still mode.)
• After a cue-up, the unit turns to still mode.
Playback still delay can be set between 0 and 9 frames by 11 steps.
You can set the delay which the unit turns to playback mode from still
mode.
• To use the unit as a normal player.
• To use the unit as a recorder with the FXE-120/120P in a system.
You can set the time which releases still or pause mode to protect the
tape. Select time from 6 settings ranging from 8 seconds to 4 minutes.
Содержание DSR-40
Страница 67: ...Appendix 67GB Appendix ...
