*
When [24p] is selected, you can select the last two digits of the time code
in multiples of four from 0 to 23 frames.
When [50i] is selected: 00:00:00:00 to 23:59:59:24
3. Set the other digits following the same procedure as in step 2, then press
in the center of the control wheel.
Note
When you tilt the monitor to shoot a self-portrait, the time code and user bit will
not be displayed.
How to reset the time code
1. MENU
→
(Setup)
→
[TC/UB Settings]
→
[TC Preset], then press
in
the center of the control wheel.
2. Press the
(Delete) button to reset the time code (00:00:00:00).
You can also reset the time code (00:00:00:00) using the RMT-VP1K remote
commander (sold separately).
How to set the user bit (UB Preset)
1. MENU
→
(Setup)
→
[TC/UB Settings]
→
[UB Preset], then press
in
the center of the control wheel.
2. Turn the control wheel and select the first two digits.
3. Set the other digits following the same procedure as in step 2, then press
in the center of the control wheel.
How to reset the user bit
1. MENU
→
(Setup)
→
[TC/UB Settings]
→
[UB Preset], then press
in
the center of the control wheel.
2. Press the
(Delete) button to reset the user bit (00 00 00 00).
How to select the recording method for the time code (TC Format
*1
)
1. MENU
→
(Setup)
→
[TC/UB Settings]
→
[TC Format], then press
in
the center of the control wheel.
DF:
Records the time code in Drop Frame
*2
format.
NDF:
Records the time code in Non-Drop Frame format.