2-17
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
2-1. Service Mode
No.
Page
Item
Setup
Description
51
TG Adj.
BC COMP.ADJ.
X (
[0]
)
This item is strictly for adjustment in the factory.
(Never change the setting.)
BC
[ON]
/OFF
This item is strictly for adjustment in the factory.
(Never change the setting.)
FIELD/FRAME
[FIELD]
/FRAME
Selects the CCD read-out system (Same as FIELD/FRAME item
of the “FUNCTION 2/2” page).
FIELD : Reading in units of field (normal setting).
FRAME : Reading in units of frame (select for improved vertical resolution).
Note : The FRAME reading has a more residual image than the FIELD reading.
TEST OUT
[ENC]
/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page)
R VSUB
X (
[0]
)
Sets the V substrate voltage value of the R signal.
G VSUB
X (
[0]
)
Sets the V substrate voltage value of the G signal.
B VSUB
X (
[0]
)
Sets the V substrate voltage value of the B signal.
52
VA ADJ.1/2
R GAIN (TMP)
Displays the gain value of the R/G/B white balance amplifier.
G GAIN (TMP)
B GAIN (TMP)
R MOD.BAL. (TMP)
Displays the modulation correction values to the R/G/B video
G MOD.BAL. (TMP)
amplifier circuits.
B MOD.BAL. (TMP)
SAW/REC
[SAW]
/REC
Selects the TEST signal to be output when the TEST SAW item is turned on.
SAW : SAWTOOTH
REC
: RECTANGULAR
TEST LEVEL
X (
[0]
)
Adjusts the gain of the TEST signal. (The amplitude of SAWTOOTH and
RECTANGULAR is automatically set for unity peak level.)
TEST SAW
ON/
[OFF]
Turns ON/OFF the function to forcibly select the TEST signal for
the video signal system (used for video signal adjustment).
53
VA ADJ.2/2
R PREKNEE (KS ON)
X (
[0]
)
Adjusts the pre-knee level when KNEE SATURATION of the
G PREKNEE (KS ON)
X (
[0]
)
R/G/B signal is turned on.
B PREKNEE (KS ON)
X (
[0]
)
R PREKNEE
X (
[0]
)
Adjusts the pre-knee level when DCC of the R/G/B signal is turned on.
G PREKNEE
X (
[0]
)
B PREKNEE
X (
[0]
)
TEST OUT
[ENC]
/R/G/B
Selects the type of video signal to be output from the TEST OUT connector.
(Same as TEST OUT item of the “FUNCTION 1/2” page).
TEST SAW
ON/
[OFF]
Turns ON/OFF the function to forcibly select the TEST signal for
the video signal system (used for video signal adjustment).
54
AD ADJ.
G AD GAIN
X (
[0]
)
Adjusts the gain of the R/G/B video signal respectively that is input
R AD GAIN
X (
[0]
)
to the A/D converter.
B AD GAIN
X (
[0]
)
Note : Never change GAIN of the G channel AD converter.
AD CLOCK PHASE
0 to 7
Adjusts the clock phase of the G signal of the A/D converter.
R/B CLOCK PHASE
0 to 7
Adjusts the clock phase of the R/B signals of the A/D converter.
55
ND COMP.
ND DETECTION
[OFF]
/EXEC/RESET EXEC : Used for color-correcting the ND filters.
ND1 DET. =
[YET]
/OK!
RESET : The correction values for the ND filters of ND1 to ND4 are reset.
ND2 DET. =
[YET]
/OK!
OFF
: When adjustment is completed, this item returns to the
ND3 DET. =
[YET]
/OK!
OFF position automatically.
ND4 DET. =
[YET]
/OK!
56
VTR ADJ.
EQ ADJUSTMENT
[OFF]
/EXEC
Used for playback equalizer automatic adjustment.
REC CURRENT ADJ.
[OFF]
/EXEC
Used for record current automatic adjustment.
CHECK ERROR RATE
ON/
[OFF]
Used for playback equalizer adjustment and recording current
adjustment.