8-26
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
8-20. Adjustment After Replacing the
Filter Disk Unit
After replacing the filter disk, the white balance adjustment
must be corrected. Follow the correction procedure
described below.
Preparation
.
WHITE BAL switch (on the inside panel)
→
Position
A or B
.
Shoot a fully occupied white area of pattern box in the
underscanned monitor frame.
.
Lens IRIS
→
AUTO
Adjustment Procedure
Equipment : Color monitor
1.
On the setup menu, set as follows.
PAGE
: S55
*
ND COMP.
ITEM
: ND DETECTION
→
EXEC
2.
Set the filter knob to the “1” position.
3.
AUTO W/B BAL switch (front panel)
→
WHT
(Perform the automatic white balance adjustment.)
n
Check that the indication “ND1 DET. = OK!” appears
on the color monitor after the automatic white balance
adjustment is completed.
4.
Set the filter knob to the “2” to “4” positions in turn,
and perform step 3 for each position.
n
When the adjustment is completed for all knob
positions “1” to “4”, the indication “COMPLETE!”
appears and the ITEM setup returns automatically to
the OFF position.
8-20. Adjustment After Replacing the Filter Disk Unit