Sony DCR-IP5 MovieShaker v3.1, Руководство по обслуживанию

Страница: 38 / 190

1-30
DCR-IP5/IP5E/IP7BT/IP7E
128
Icon/item
* MOVIE SET
MOVIEMODE
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
Changing the menu settings
* DCR-IP7E only
Notes on formatting (DCR-IP7E only)
•The “Memory Stick” supplied with your camcorder has been formatted at the factory. Formatting
with your camcorder is not required.
•Do not slide the POWER switch or press any button while “FORMATTING” is displayed.
•You cannot format the “Memory Stick” if its write-protect switch is set to LOCK.
•Format the “Memory Stick” if “
FORMAT ERROR” appears.
Formatting erases all information on the “Memory Stick” (DCR-IP7E only)
Check the contents of the “Memory Stick” before formatting.
• Formatting erases sample images on the “Memory Stick”.
• Formatting erases protected image data on the “Memory Stick”.
POWER
switch
MEMORY
VCR
MEMORY
MEMORY
MEMORY
VCR
Meaning
To record moving pictures with super fine image
quality.
To record moving pictures with fine image quality.
To record moving pictures with standard image
quality.
To record moving pictures to be used as an e-mail
attachment.
To play back images in a continuous loop (p. 188).
To delete all unprotected images (p. 195).
To cancel formatting.
To format the inserted “Memory Stick”.
1. Select FORMAT, then press the centre
z
on the
control button.
2. Select OK, then press the centre
z
on the control
button.
3. After “EXECUTE” appears, select EXECUTE, then
press the centre
z
on the control button.
“FORMATTING” flashes during formatting.
“COMPLETE” appears when formatting is finished.
To duplicate still images on the tape and save them
onto the “Memory Stick” (p. 171).
Mode
z
SUPER FINE
FINE
STANDARD
LIGHTMODE
——
——
z
RETURN
OK
——
129
Customizing Your Camcorder/
Bыполнeниe индивидyaльныx ycтaновок нa видeокaмepe
Icon/item
TITLEERASE
TITLE DSPL
TAPE TITLE
ERASE ALL
q
INFODSPL
q
REMAIN
CLOCK SET
LTR SIZE
DEMO MODE
Changing the menu settings
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) as the default setting and the demonstration starts about 10
minutes after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to a position other than
CAMERA, or set DEMO MODE to OFF. To set to STBY (Standby) again, leave the DEMO MODE to
ON in the menu settings, set the POWER switch to OFF (CHG), and slide the POWER switch to
CAMERA.
POWER
switch
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
MEMORY
CAMERA
MEMORY
VCR
CAMERA
Meaning
To erase a superimposed title (p. 114).
To display a superimposed title.
To not display the title.
To label a cassette (p. 121).
To erase all the data in the Micro Cassette Memory
(p. 123).
To display the cassette information of the tape. This
is displayed for 5 seconds in the following cases: (p.
120).
• When turning on the power with a cassette
inserted or inserting a cassette.
• When entering the VCR mode using the POWER
switch.
To not display the cassette information of the tape.
To display the remaining tape bar:
• for about 8 seconds after your camcorder is turned
on or a cassette is inserted, and also calculate the
remaining amount of tape.
• for about 8 seconds after you select and you
press the centre
z
on the control button or
DISPLAY is pressed to display the screen
indicators.
• During fast-forwarding or rewinding the tape.
To always display the remaining tape indicator.
To set the date or time (p. 32).
To display the selected menu item in normal size.
To display the selected menu item at twice the
normal size.
To make the demonstration appear.
To cancel the demonstration mode.
Mode
——
z
ON
OFF
——
——
z
ON
OFF
z
AUTO
ON
——
z
NORMAL
2
×
z
ON
OFF
(continued on the following page)
130
Icon/item
DATA CODE*
AREA SET
SUMMERTIME
BEEP
COMMANDER
DISPLAY
REC LAMP
Changing the menu settings
* Using the Remote Commander only
Note
If you press DISPLAY with “DISPLAY” set to “V-OUT/LCD” in the menu settings, the picture from
the TV or VCR will not appear on the screen even when your camcorder is connected to outputs on the
TV or VCR.
Even if the power source is detached from the camcorder
The menu items settings will be retained even if you remove the power source.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is too close. In this case, we recommend you set REC LAMP to OFF.
POWER
switch
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
Meaning
To display date, time and various settings during
playback.
To display date and time during playback.
To set your area temporarily, when using the
camcorder in a new location (p. 34).
To be used when your area is not in daylight saving
time.
To be used when your area is in daylight saving
time.
To output a melody when you start/stop recording
or when an unusual condition occurs on your
camcorder.
To output a beep instead of the melody.
To cancel both the melody and beep sound.
To activate the Remote Commander supplied with
your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by remote
control of other VCRs.
To show the indicators on the LCD screen and
viewfinder.
To show the indicators on the TV screen, LCD screen
and viewfinder.
To light up the camera recording lamp at the front of
your camcorder.
To turn the camera recording lamp off so that the
subject is not aware of your recording.
Mode
z
DATE/CAM
DATE
——
z
OFF
ON
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF
136
– DCR-IP7E only
You can record an image onto the “Memory
Stick” and easily play it back on your camcorder.
The following functions are also available using
the “Memory Stick”.
•To capture an image recorded on the tape using
the “Memory Stick”.
•To duplicate a still image recorded on the
“Memory Stick” onto the tape.
•To duplicate an image and save it to your
computer via the supplied USB cable.
•To delete an image, protect an image, and write
a print mark.
On file format
Still image (JPEG)
Your camcorder compresses image data in the
JPEG format (file extension .jpg).
Moving picture (MPEG)
Your camcorder compresses picture data in the
MPEG format (file extension .mpg).
Typical image data file name
Still image
100-0001:
This file name appears on the
screen of your camcorder.
Dsc00001.jpg: This file name appears on the
display of your computer.
Moving picture
MOV10001:
This file name appears on the
screen of your camcorder.
Mov10001.mpg: This file name appears on the
display of your computer.
— “Memory Stick” Operations —
Using a “Memory
Stick” – introduction
– Tолько модeль DCR-IP7E
Bы можeтe зaпиcывaть изобpaжeниe нa
“Memory Stick” и лeгко воcпpоизвecти eго нa
видeокaмepe. Кpомe того, c помощью
“Memory Stick” можно выполнять cлeдyющиe
фyнкции.
• Cнимaть изобpaжeниe, зaпиcaнноe нa
лeнтe, c помощью “Memory Stick”.
• Cкопиpовaть нeподвижноe изобpaжeниe,
зaпиcaнноe нa “Memory Stick”, нa лeнтy.
• Cкопиpовaть изобpaжeниe и cоxpaнить eго
нa компьютep c помощью пpилaгaeмого
кaбeля USB.
• Удaлить изобpaжeниe, зaщитить
изобpaжeниe и зaпиcaть пeчaтный знaк.
O фоpмaтe фaйлов
Heподвижноe изобpaжeниe (JPEG)
Этa видeокaмepa cжимaeт дaнныe
изобpaжeния в фоpмaт JPEG (c pacшиpeниeм
фaйлa .jpg).
Движyщeecя изобpaжeниe (MPEG)
Этa видeокaмepa cжимaeт дaнныe
изобpaжeния в фоpмaт MPEG (c
pacшиpeниeм фaйлa .mpg).
Tипичноe имя фaйлa дaнныx изобpaжeния
Heподвижноe изобpaжeниe
100-0001:
Это имя фaйлa появитcя нa
экpaнe видeокaмepы.
Dsc00001.jpg: Это имя фaйлa появитcя нa
монитоpe компьютepa.
Движyщeecя изобpaжeниe
MOV10001:
Это имя фaйлa появитcя нa
экpaнe видeокaмepы.
Mov10001.mpg: Это имя фaйлa появитcя нa
монитоpe компьютepa.
— Oпepaции c “Memory Stick” —
Иcпользовaниe “Memory
Stick” – Bвeдeниe