Sony DCR-IP5 MovieShaker v3.1, Руководство по обслуживанию

Страница: 153 / 190

5-27
DCR-IP5/IP5E/IP7BT/IP7E
16. White Balance Check
Subject Clear chart
(Color reproduction adjustment frame)
Filter Filter C14 for color temperature
correction
ND filter 1.0 and 0.4 and 0.1
Measurement Point Video output terminal
Measuring Instrument Vectorscope
Specified Value Fig. 5-1-13. A to B
Switch setting:
1)
POWER .................................................................. CAMERA
2) DIGITAL ZOOM (Menu display) ................................... OFF
Checking method:
Order Page Address Data Procedure
Indoor white balance check
1 Check that the lens is not covered
with either filter.
2 6 30 01 Set the data.
3 Check that the center of the white
luminance point is within the
circle shown Fig. 5-1-13. A.
4 6 30 00 Set the data.
Outdoor white balance check
5 6 01 3F Set the data, and press PAUSE
button.
6 Place the C14 filter on the lens.
7 Check that the center of the white
luminance point is within the
circle shown Fig. 5-1-13. B.
8 Remove the C14 filter.
Indoor white balance data check
9 6 01 00 Set the data, and press PAUSE
button.
10 Place the ND filter 1.5 (1.0 + 0.1
+ 0.4) on the lens.
11 0 01 01 Set the data.
12 F 10 A9 Set the data, and press PAUSE
button.
13 1 Check that the display data (Note)
satisfies the specified value.
Specified value: 0000 to 0BC0
14 F 10 A1 Set the data, and press PAUSE
button.
15 1 Check that the second digit of the
display data (Note) is “1”.
Specified value:
1 : XX : 1X
“1”
Note: Displayed data of the adjustment remote commander.
1 : XX : XX
Display data
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 F 10 00 Set the data, and press PAUSE
button.
3 0 01 00 Set the data.
Fig. 5-1-13. (B)
R-Y 2mm
B-Y
2mm
R-Y
B-Y
1mm
0.5mm
3mm
3mm
Fig. 5-1-13. (A)