2-18
DCR-IP210/IP210E/IP220/IP220E
LANC jack
CN4101
DC-IN connector
DC-098 board
DI-087 board
VC-308 board
ST-076 board
CN4201
DI-087 board
CN2019
CD-406 board
CN1000
Adjustment remote
commander (RM-95)
AC power
adaptor
AC IN
Mechanism deck
Cabinet (F) block assembly
Cabinet (rear) block assembly
Lens block assembly
Control switch block
(SS-2980)
Control switch block
(PW-2980)
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the “Forced VTR power ON” mode.
Operate the VTR functions using the adjustment remote commander (with the HOLD switch set in the OFF position)
or the touch panel.
Setting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and
press the PAUSE button of the adjustment remote
commander.
Exiting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
FP-542 flexible board
This wire must be connected
to eject the cassette.
Must be connected
CN001
CN453
CN455
CN456
CN458
CN463
CN452
(CPC)
CN461
CN2020
WWW.FREESERVICEMANUALS.INFO
12/2
WWW.NOSTATECH.NL
Worlf of free manuals
