2-22
DCR-IP210/IP210E/IP220/IP220E
2-23.FP-541 BOARD
1
Screw
(M1.7
×
2.5),
EG grip (black)
2
Tapping screw
(M1.7
×
5)
5
Cabinet (F) ground plate
3
Tapping screw
(M1.7
×
3.5)
4
2
Screw
(M1.7
×
2.5),
EG grip (silver)
5
Screw
(M1.7
×
2.5),
EG grip (silver)
6
Jack fixed plate
3
Screw
(M1.7
×
2.5),
EG grip (silver)
1
Two claws
7
FP-541 board,
Laser unit
3
FP-541 board
2
Laser unit (D5104)
1
Remove soldering
from the three points.
4
Flexible fixed plate assembly
Caution
Caution
Be careful not to drop.
When soldering the laser unit on the FP-541 board,
observe the following
thing
s.
(Refer to Service Note (page 1-3)).
Observe the following conditions of temperature
and time of soldering.
Temperature of soldering iron : 350˚
Time of contacting the soldering : 3 seconds
iron with the solder
The laser diode may suffer electrostatic breakdown
because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the
human body.
During repair, pay attention to electrostatic breakdown
and also use the procedure in the printed matter which
is included in the repair parts.
The flexible board is easily damaged and should be
handled with care.
WWW.FREESERVICEMANUALS.INFO
12/2
WWW.NOSTATECH.NL
Worlf of free manuals
