Sony DCR-HC1000 - Digital Handycam Camcorder страница 110 Скачать руководство пользователя

Страница: 110 / 140

Troubleshooting

110

Playback

If you are playing back the pictures stored on a “Memory Stick Duo,” refer also to the “Memory Stick
Duo” section. (p. 111)

END SEARCH does not work
correctly.

• There is a blank section in the beginning or middle of the tape. This is

not a malfunction.

Symptom

Cause and/or Corrective Actions

Cannot play back.

If the tape has reached the end, rewind the tape. (p. 44)

Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.

Clean the head using the cleaning cassette (optional). (p. 127)

Fine patterns flicker, diagonal lines
look jagged.

Adjust [SHARPNESS] to the

(soften) side in the

(CAMERA

SET) menu before recording. (p. 58)

No sound or only a low sound is
heard.

Set [MULTI-SOUND] to [STEREO] in the

(STANDARD SET)

menu. (p. 76)

Turn up the volume. (p. 44)

On the

(STANDARD SET) menu, adjust [AUDIO MIX] from the

[ST2/REAR] side until the sound is heard appropriately. (p. 77)

When you are using an S VIDEO plug, make sure the red and white plugs
of the A/V connecting cable are connected as well. (p. 51)

Sound recorded using the 4CH MIC
REC function is not heard.

Adjust [AUDIO MIX] in the

(STANDARD SET) menu. (p. 28)

The sound breaks off.

Clean the head using the cleaning cassette (optional). (p. 127)

Cannot perform the Date search with
the recording date displayed on the
screen.

Use a cassette with Cassette Memory. (p. 120)

Set [

SEARCH] to [ON] in the

(EDIT/PLAY) menu. (p. 73)

• There is a blank section in the beginning or middle of the tape. This is

not a malfunction.

“---” is displayed on the screen.

• The tape you are playing was recorded without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.

END SEARCH does not work.

• The cassette was ejected after recording when using a cassette without

Cassette Memory. (p. 120)

• The cassette is new and has nothing recorded.

END SEARCH does not work
correctly.

• There is a blank section in the beginning or middle of the tape. This is

not a malfunction.

Noises appear and

is displayed

on the screen.

• The tape was recorded in a TV color system other than that of your

camcorder. This is not a malfunction. (p. 119)

Symptom

Cause and/or Corrective Actions

Содержание DCR-HC1000 - Digital Handycam Camcorder













































































































































Результаты поиска

Содержание DCR-HC1000 - Digital Handycam Camcorder

Отзывы:

Похожие инструкции для DCR-HC1000 - Digital Handycam Camcorder

Бренды по названию

Популярные бренды

Sony DCR-HC1000 - Digital Handycam Camcorder, Руководство по эксплуатации

Результаты поиска

Содержание DCR-HC1000 - Digital Handycam Camcorder

Отзывы:

Похожие инструкции для DCR-HC1000 - Digital Handycam Camcorder

Бренды по названию

Популярные бренды