Sony Cyber-shot DSC-F707, Руководство по обслуживанию

Страница: 99 / 138

5-25
DSC-F707
16. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
Mode CAMERA
Subject Color bar chart
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page F
Adjustment Address 94 to 9F
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2:
Refer to “Picture Frame Setting” for YH and YL.
Note 3:
“Color Reproduction Adjustment” is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
3 6 2C 01
4 6 90 00
5 6 91 00
6 6 92 YL (Note 2)
7 6 93 YH (Note 2)
8 6 01 79 Press PAUSE button.
9 6 07
Check the data changes to
“01”.
10 6 01 00 Press PAUSE button.
11 6 01 AB Press PAUSE button.
12 6 12 80
13 Wait for 1 second.
14 6 12 00
15 Wait for 2 seconds.
16 6 01 A9
Press PAUSE button.
(Note 4)
17 6 02
Check the data changes to
“01”.
Note 4:
The adjustment data will be automatically input to page:
F, address: 94 to 9F.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 2C 00
3 6 92 00
4 6 93 00
5
Release the data setting
performed at step 2.
(Refer to page 5-13)
6 0 01 00