Sony Cyber-shot DSC-F707, Руководство по обслуживанию

Страница: 102 / 138

5-28
DSC-F707
19. CCD White Defect Compensation
Mode CAMERA
Subject Not required
Measurement Point Displayed data of page: 6,
address: 55
Measuring Instrument Adjusting remote commander
Adjustment Page B
Adjustment Address 60 to D7
Note 1:
Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: The“CCD White Defect Compensation” should be made
when the set warms up at certain duration after the power
was turned on, as it is affected with the temperature.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
3 E 64 Note down the data.
4 E 64 1E Press PAUSE button.
5 E 69 Note down the data.
6 E 69 0B Press PAUSE button.
7 6 01 8B
Press PAUSE button.
(Note 3)
8 6 02
Check the data changes to
“01”.
9 6 55
Check the data.
00 to 7F: Normal
80 to FF: Defective
10 6 01 00 Press PAUSE button.
11 E 64 0F Press PAUSE button.
12 E 69 60 Press PAUSE button.
13 6 01 87 Press PAUSE button.
14 6 02
Check the data changes to
“01”.
15 6 55
Check the data.
00: Normal
01 to FF: Defective
Note 3:
The adjustment data will be automatically input to page:
B, address: 60 to D7.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 E 64
Set data noted down at step
3, and press PAUSE button.
3 E 69
Set data noted down at step
5, and press PAUSE button.
4
Release the data setting
performed at step 2.
(Refer to page 5-13)
5 0 01 00