COM-1.US.2-668-393-12(2)
Communication – Skype…
Signing in Skype
43
43
Press
/
to select “Sign In,” and then press the center button.
The unit turns on the wireless LAN in infrastructure mode. The
WIRELESS LAN indicator lights up green, the status indicator lights up
blue, and
appears on the status bar.
on the status bar of the display has the following meanings:
Blinks blue: The unit is attempting to connect to wireless network.
Lights up blue: The unit has connected to wireless network.
Lights up white: The unit has been unable to connect to wireless network.
When the connection to wireless network is completed, press BACK to
close the Connection Dialog. Then, select “Sign In,” and press the center
button again. A confirmation dialog appears. Follow the instructions on
the display to sign in to Skype.
Note
• If you are connecting to a public wireless hotspot, you may be required to log in using
the web browser once connected to the wireless network.
To disconnect from wireless network
Slide and hold the WIRELESS LAN switch upward. The unit disconnects
from wireless network. The WIRELESS LAN indicator and status indicator
turn off, and
changes to “OFF” on the status bar.
To check the signal strength of the network connection
The signal strength of the connected network connection is displayed on the
status bar of the display. The more circles displayed around the antenna, the
stronger the signal of the network connection. When the unit is not connected
to wireless network, a gray antenna is displayed.
Continued
Index
Table of
Contents