Sony CDJ-500, Руководство по обслуживанию

Страница: 4 / 104

4
2. While pressing the OPEN button, DISC SKIP – button, and
DISC SKIP + button simultaneously, press the
U
button to
turn ON the power. When the CHANGER indicator starts to
blink, release the OPEN , DISC SKIP – and DISC SKIP +
buttons.
3. The front door opens automatically. Set one disc in any slot.
4. Close the front door.
5. Loading in and loading out of the disc are repeated.
6. To end, press the
U
button to turn OFF the power.
DISC TABLE AGING
* This mode is used for operating the disc table randomly.
Operations will continue unless an error occur.
Procedure:
1. Set the DIP switches on the back panel as shown below.
SECTION 1
SERVICE NOTE
LOADING IN/OUT AGING
Loading in and loading out are repeatedly carried out in this aging
mode.
Operations are stopped when an error occurs. (When loading in or
loading out took more than 6 seconds.)
Procedure:
1. Set the DIP switches on the back panel as shown below.
TOTAL AGING
This mode is used for executing loading in and loading out of discs
in any slits sequentially.
Operations are stopped when an error occurs.
Procedure:
1. Set the DIP switches on the back panel as shown below.
2. While pressing the OPEN button, DISC SKIP – button, and
DISC SKIP + button simultaneously, press the
U
button to
turn ON the power. When the CHANGER indicator starts to
blink, release the OPEN , DISC SKIP – and DISC SKIP +
buttons.
3. The front door opens automatically.
4. Close the front door to start aging.
5. To end aging, press the OPEN button.
2. While pressing the OPEN button, DISC SKIP – button, and
DISC SKIP + button simultaneously, press the
U
button to
turn ON the power. When the CHANGER indicator starts to
blink, release the OPEN , DISC SKIP – and DISC SKIP +
buttons.
3. The front door opens automatically. Set discs in any slot.
4. Close the front door to start aging.
5. During aging, operations are repeated in the order of “rotation
of disc table”
n
”loading in”
n
”disc access”
n
”loading
out”
n
”rotation of disc table”.
6. To end aging, press the OPEN button .
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
ON
ON OFF
Remove the
shield.
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE CHANGER
ON ON
OFF Remove the
shield.
SCSI TERM
MODE
ID SELECT
4 2 1 4 2 1
DRIVE
CHANGER
ON
ON
Remove the
shield.