Sony CDJ-500, Руководство по обслуживанию

Страница: 10 / 104

10
12. When the inspections are executed, the status will be displayed
at the bottom of the screen. The results of each inspection will
be displayed on the right side of the screen.
The status of the inspection currently performed are displayed at real-time.
The value of the test results will be displayed.
The results of the inspection will be displayed as OK or NG.
13. The following appears at the bottom of the screen. Check the
audio signal here. During this test, analog audio signals are out-
put from the ANALOG OUT and digital audio signals from the
DIGITAL OUT.
Check the sounds according to the instructions on the screen.
After completing preparations to check the sounds, press the
space key.
14. When the following screen appears, the 1 KHz sine wave is
output from the L-CH. Enter “Y” and press the ENTER key if
OK. If no sounds are produced from the L-CH or produced from
R-CH, enter “N” and press the ENTER key for negative.
After checking, enter “Y” or “N”.