Function and Location of Parts and Controls
6
Rear panel
a
CAMERA connector (triax connector)
Connects to the CA-570/570P/590/590P/905K/F/T
Camera Adaptor attached to the BVP-E10/E10P/E10WS/
E10WSP/E30/E30P/E30WS/E30WSP Color Video
Camera using a triax cable.
Do not use a defective triaxial cable.
The inner sheath of a triaxial cable is used for power
supply and the outer sheath for safety ground.
For your safety, do not use a triaxial cable whose inner and
outer sheaths are short-circuited. Use of such a cable will
cause electric shock.
b
AUDIO OUTPUT connectors (XLR, 3-pin)
Supply audio signals from the video camera.
c
INPUT connectors
The REFERENCE INPUT connectors, RET-1 connectors,
and the RET-2/PROMPTER connectors are loop-through
connectors.
A
REFERENCE INPUT connectors (BNC type)
The upper connector accepts reference signals (black burst
signal) for external synchronization. The input signal is
output from the lower connector. The reference input
signal can be terminated at 75 ohms internally. To
terminate the signal, input the reference signal to the upper
connector.
a
CAMERA connector
b
AUDIO OUTPUT connectors
c
INPUT connectors
d
OUTPUT connectors
e
REMOTE connector
f
ETHERNET connector
i
WF MODE connector
j
AC IN connector
g
INTERCOM/TALLY/PGM connector
h
MIC REMOTE connector
k
SDI OUTPUT connectors
Caution
A
REFERENCE INPUT connectors
B
RET-1 connectors
C
RET-2/PROMPTER connectors
D
SDI RET-3/RET-4 connectors
E
COAX connector
F
SPARE connector
