Sony CCU-790P, Руководство по эксплуатации

Страница: 14 / 18

Self-Diagnostics
14
Gen Lock : Locking status
CCU Power : CCU power supply type (AC/DC) and power
supply status
BATT Volt : Voltage of the coin battery supplied with the
AT board
PLL Volt : Status of the PLL circuit of the AT board
CCU Mode: Operation mode of the CCU
PLD : Status of the PLD mounted on the AT board and
program version of the PLD
Board ID : ID number of the AT board
AU board
MIC : Audio embedding for the main SDI video signal.
FRONT-INCOM : Settings of the front intercom
INCOM : Channel setting for the intercom made on the
video camera
PGM : Program audio setting
AudioPLL : PLL status of the audio signal
Power : AU board power supply status
CN : CN board power supply status
PLD : Status of the PLD mounted on the AU board and
program version of the PLD
Board ID : ID number of the AU board
IV board
RETURN : Input settings for the return channels 1 to 4
MIX-Y : Setting for camera signal to be mixed with the
return signal
Power: IV board power supply status
DIF : Power status of the DIF board connected to the rear
of the IV board
PLD : Status of the PLD mounted on the IV board and
program version of the PLD
BoardID : ID number of the IV board
EN board
Component : Setting status of the component output signal
from the OUTPUT connector and status of the sync
signal added to the component Y/G output signal from
the OUTPUT connector
Composite : Setting status of the composite output signal
from the OUTPUT connector
Power : EN board power supply status
VDA : Power supply status of the VDA board on the rear
SC-REF : Lock status to the subcarrier of the external
reference signal
PLD : Status of the PLD mounted on the EN board and
program version of the PLD
BoardID : ID number of the EN board
Self-diagnostics results of the
camera internal boards