Sony CCU-550A, Руководство по эксплуатации

Страница: 26 / 32

10(E)
Self-Diagnostics
Self-Diagnostics
When an RCP-700 series remote control panel is
connected to the CCU-550A/550AP, you can display
the results of self-diagnostics of the internal boards of
the CCU-550A/550AP on a monitor screen.
Self-diagnostics of the camera system
The results of self-diagnostics of the camera system
are displayed on three pages. To display the results,
press the CHARACTER button on the RCP-700 series
remote control panel while the CHARACTER button
is off. Press the CHARACTER button again to display
successive pages.
Page 1
TRIAX Cable: Triax cable connection status
(connected/disconnected)
TRIAX Comp.: Cable compensation of a triax cable
(automatic/manual)
TRIAX Step: Triax cable length (step indication in
the circuit: 1 to 3)
Timer: Elapsed time on the CCU-550A/550AP
internal AT board
For details on the internal boards, refer to System Manual.
Page 2
CAMERA Cable: Camera cable connection status
(connected/shorted)
CAMERA Data: Camera data transmission status
CAMERA Power: Power supply status of the
camera
CAMERA Tone: Camera ID tone status
RCP/CNU Cable: Connection status of the RCP/
CNU connector (connected/shorted)
RCP/CNU Data: Data transmission status of the
RCP/CNU connector
RCP/CNU Power: Power supply status of the RCP/
CNU connector
PANEL data: Data transmission status of the BKP-
5973
For details on the internal boards, refer to System Manual.
Page 3
Intercom CAMERA CH1: Status of intercom 1
(producer/engineer)
Intercom CAMERA CH1 MIC: Microphone status
of intercom 1 (on/off)
CAMERA MIC Gain: Gain and control status of
the microphone circuit
For details on the internal boards, refer to System Manual.
*System Diag 2/3*
CAMERA Cable Connect
Data OK
Power ON
Tone OK
RCP/CNU Cable Connect
Data OK
Power OK
PANEL Data OK
*System Diag 3/3*
Intercom
CAMERA CH1 PROD
MIC OFF
CAMERA MIC Gain
Cont. Local
CH1 60dB
CH2 40dB
*System Diag 1/3*
TRIAX Cable Connect
Comp. Auto
Step 2
Timer 0H