Sony CCU-550A, Руководство по эксплуатации

Страница: 22 / 32

Function and Location of Parts and Controls
6(E)
Rear panel
Rear panel
3
INPUT connectors
REFERENCE INPUT connectors (BNC type)
Accept reference signals (black burst signal) for
external synchronization.
RET 1/RET 2 (return video signal 1/2) connectors
(BNC type)
Accept return video signals from two different
systems.
For details on the selection of RET 1 and RET 2, refer to
Operation Manual that came with the camera or camera
adaptor.
PROMPTER/RET 3 (return video signal 3)
connectors (BNC type)
Accept a teleprompter signal or a return video signal.
Use the switch on the internal DM board to select
PROMPTER or RET 3.
For details on the selection of RET 3, refer to Operation
Manual that came with the camera or camera adaptor.
For details on the internal boards, refer to System Manual.
5
SERIAL OUTPUT connectors
1
CAMERA connector
6
MIC REMOTE connector
2
MIC OUTPUT connectors
9
COAX connector
!º
AC IN connector
8
RCP/CNU REMOTE connector
7
INTERCOM/TALLY/PGM connector
1
CAMERA connector (triax connector)
Connects to the CA-550/550P/570/570P/905K/905F
Camera Adaptor attached to the BVP-550/570/950/
950P Color Video Camera or the BVP-750/750P Color
Video Camera using a triax cable.
Caution
Do NOT use a defective triaxial cable.
The inner sheath of a triaxial cable is used for power
supply and the outer sheath for safety ground.
For your safety, do NOT use a triaxial cable whose
inner and outer sheaths are short-circuited. Use of
such a cable will cause electric shock.
2
MIC (microphone) OUTPUT connectors (XLR,
3-pin)
Supply the microphone signals from the video camera.
MIC OUTPUT
INPUT
SERIAL
OUTPUT
OUTPUT
COAX
RET 1 R-Y/R
REFERENCE Y/G VBS3 VBS1
RET 2 B-Y/B
WF VBS2
WF MODE
PROMPTER/RET 3 PIX
MIC REMOTE REMOTE INTERCOM/TALLY/PGM
CAMERA
CH-1 CH-2
RCP/CNU
3
INPUT connectors
4
OUTPUT connectors