Sony Camcorder / Wireless Microphone Скачать руководство пользователя | Manualshive

Страница: 14 / 82

background image

14

Key Features of WiDIF-HP

Analog wireless system

Digital wireless system
(WiDIF-HP)

FM-modulated
audio signal

Digitally modulated
coded audio

The risk of being intercepted by a
receiver of an outside system.

For confidential communication,
WiDIF-HP provides two
communication modes:
1) Secure key mode
2) Password mode

Encrypted Transmission

In an analog system, the frequency-modulated (FM) audio signal can be received by anyone with the right
equipment and some technical knowledge. By contrast, a digital system allows the use of encryption to make
the wireless transmission secure. The signals cannot be decoded by a conventional wideband receiver.
This makes it easy to maintain confidentiality for conference rooms, live performance venues and other
applications where strong measures against interception are required.

The Sony digital system offers the choice between a secure mode using encryption keys, and a password
mode where a secure group comprising multiple transmitters and receivers can be created.

Secure key mode

This is a one-on-one arrangement where the encryption key generated by the transmitter is used for a single
transmitter/receiver pair only. The mode provides highly secure strong encryption.

Password mode

A password that can be freely specified is set for a number of transmitters and receivers, and only
equipment using that password can communicate with each other. Connection to equipment without the
password set is blocked, resulting in secure operation.

Application example: broadcast station

All pieces of equipment used by the station are assigned the same password, allowing secure operation by
staff without having to worry about complicated setup procedures or information leaks. It is also possible to
broadcast audio from one transmitter to multiple receivers. Besides applications in the broadcasting sector,
this kind of system is also suitable for example for government and other public offices where information must
be transmitted securely.

Notes

Encrypted transmission does not guarantee 100% confidentiality.



Changing the password on a regular basis is recommended.



Meta

Using

Metad

Technology

«
...
12
13
14
15
16
...
»

Содержание Camcorder / Wireless Microphone



















































































Отзывы:

Нет отзывов

Похожие инструкции для Camcorder / Wireless Microphone

Бренд: Samson Страницы: 2

Бренд: Earthworks Страницы: 2

Бренд: Nady Systems Страницы: 10

Бренд: Nady Systems Страницы: 2

Бренд: Nady Systems Страницы: 2

Бренд: Nady Systems Страницы: 19

Бренд: Paccar Страницы: 48

Бренд: ascon Страницы: 8

Бренд: Qtx Страницы: 4

SureCross DX99 FlexPower DX99N9X2S0N0R4X0A0

Бренд: Banner Страницы: 7

Бренд: Component Solution Services Страницы: 14

Бренд: Midland Страницы: 14

Бренд: Earthworks Страницы: 10

Бренд: Earthworks Страницы: 2

Бренд: Neat Microphones Страницы: 6

Бренд: CAD Страницы: 4

Бренд: SCOPE LABS Страницы: 5

Бренд: FONESTAR Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды