Sony Camcorder / Wireless Microphone Скачать руководство пользователя

Страница: 67 / 82

Making and Checking Network Settings

ate

erly.



Computer network settings

Use the regular procedure for the respective operating system to set the IP address and subnet mask of the
computer.

PC network settings

The following procedure explains the setting operations using the Windows XP operating system.

* For details on how to make network settings with other operating systems, refer to the help of the operating system that you use.

1 Select “Start>Control Panel>Network and Internet Connections”.

2 Click

“Network Connections”.

3 Right-click the local area connection icon and then click “Properties”.

4 Double-click “Internet Protocol 4 (TCP/IP)”.

The properties window of the local area connection opens up.

5 Double-click “Internet Protocol (TCP/IP)”.

The internet protocol (TCP/IP) properties window opens up.

6 Click “Use the following IP address”, and then enter the IP address in the IP address field.

Note

Make sure not to use an IP address that is already assigned to another device on the network.

7 Enter “255 255 255 0” into the Subnet Mask field.

8 Click “OK” to close the internet protocol (TCP/IP) properties window.

9 Click “Close” to close the local area connection properties window.



DWR-R01D network settings

Configure the IP address and subnet mask for the DWR-R01D in the NETWORK submenu of the UTILITY menu.

Note

When IP address settings are changed, NT mode pairing settings are disabled. Perform the pairing process
again.

Configuring a DWX System

Содержание Camcorder / Wireless Microphone



















































































Результаты поиска

Содержание Camcorder / Wireless Microphone

Отзывы:

Похожие инструкции для Camcorder / Wireless Microphone

Бренды по названию

Популярные бренды

Sony Camcorder / Wireless Microphone, Информация о продукте

Результаты поиска

Содержание Camcorder / Wireless Microphone

Отзывы:

Похожие инструкции для Camcorder / Wireless Microphone

Бренды по названию

Популярные бренды