1-44
DSR-300/P(E)/V1
86
Chapter 4
Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Item
MARKER
Selects ON/OFF setting for
center marker, size setting
(percentage of viewfinder
screen area), and display
ON/OFF setting.
CENT/90% (normal value):
Displays center marker and
safety zone marker at 90%
size.
CENT/80%: Displays center
marker and safety zone
marker at 80% size.
90%: Displays only safety
zone marker at 90% size.
80%: Displays only safety
zone marker at 80% size.
CENT: Displays only center
marker.
ZEBRA
Selects type of zebra pattern
display.
1 (normal value): Displays
the zebra pattern over parts
having a video level.
between 70 and 90 IRE (or
70 and 90%).
Use the next item (ZEBRA1)
to select the base level.
2: Displays the zebra pattern
over parts having video
levels of 100 IRE or above
( or 100% or above).
1/2: Dual display (both 1
and 2)
ZEBRA1
Sets base level for zebra
pattern 1.
70 IRE (normal value) to 90
IRE or 70% (normal value)
to 90%
Can be set for each IRE
step or 1% step.
INT (normal value):
Recording time of the
internal VCR
EXT: Recording time of the
external VCR
×
1: Uses only the upper
REC/TALLY indicator.
×
2 (normal value): Uses
two REC/TALLY indicators.
Settings
–99 to ±0 (normal value) to
+99
Negative values set softer
edges and positive values
set sharper edges.
VF TALLY
Selects whether or not to use
more than one REC/TALLY
indicators in the viewfinder
(displayed only when the
DXF-701WS/701WSCE
viewfinder is attached).
Advanced menu page 4
PAGE4 (NEXT
m
$
PREV
m
4
)
MARKER : CENT/90%
m
ZEBRA : 1
ZEBRA1 : 70IRE
REC TIME: INT
VF SDTL :
±
0
VF TALLY:
×
2
EXIT MENU (YES
m
PUSH)
a) For DSR-300P: 70%
Advanced menu page 5
PAGE5 (NEXT
m
$
PREV
m
4
)
m
SS IND: ALWAYS
LL IND: ON
IRIS IND: ON
GAIN IND: ON
FILTER IND: ON
WHITE IND: ON
SKIN IND: ON
EXIT MENU (YES
m
PUSH)
REC TIME
Selects whether to show the
recording time (TTL) of the
internal VCR or of the
external VCR.
VF SDTL
Sets the detail level of
images on the viewfinder
screen (displayed when
using a viewfinder other than
the DXF-701/701CE/701WS/
701WSCE).
Item
Settings
SS IND
Selects the mode for
showing the shutter setting
when displaying the normal
indications.
3SEC: Displays shutter
setting for three seconds only
when the setting has been
changed.
ALWAYS (normal value):
Displays the shutter setting at
all times.
LL IND
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
ON (normal value):
Displays.
OFF: Not display.
IRIS IND
Selects whether or not to
show the lens’s F-stop value
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
ON (normal value):
Displays.
OFF: Not display.
GAIN IND
Selects whether or not to
always show the gain
setting indication on the
normal indications.
ON (normal value): Always
displays.
OFF: displays for two
seconds only when the
setting has been changed.
FILTER IND
Selects whether or not to
always show the FILTER
knob setting indication on
the normal indications.
The FILTER knob setting
indication is always
displayed when in EZ mode.
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
WHITE IND
Selects whether or not to
show the setting of the white
balance switch.
ON (normal value): Displays.
OFF: Not display.
SKIN IND
Selects whether or not to
show the setting for skin
detail correction.
ON (normal value): Displays.
OFF: Not display.
Viewfinder Advanced Menu
Chapter 4
Viewfinder Screen Indications and Menus
87
Chapter 4 Viewfinder Screen Indications and Menus
Advanced menu page 6
PAGE6 (NEXT
m
$
PREV
m
4
)
m
AUDIO IND: ON
TAPE IND: ON
TC IND: ON
ID IND: OFF
ID SET:
µ
( )
EXIT MENU (YES
m
PUSH)
To set the camera ID
1
Press the MENU switch or turn the MENU dial to
move the cursor to ID SET.
The cursor (
→
) changes to the text entry arrow (
↓
).
PAGE6 (NEXT
m
$
PREV
m
4
)
AUDIO IND: ON
TAPE IND: ON
TC IND: ON
ID IND: OFF
ID SET:
µ
(ABC )
EXIT MENU (YES
m
PUSH)
2
Press and turn the MENU dial to move the text
entry arrow.
Turn the MENU dial upward to move the cursor to
the right or downward to move it to the left.
Item
Settings
AUDIO IND
Selects whether or not to
show the audio level
indication on the normal
indications.
ON (normal value):
Displays.
OFF: Not display.
TAPE IND
Selects whether or not to
show the remaining tape
indication on the normal
indications.
ON (normal value):
Displays.
OFF: Not display.
TC IND
Selects whether or not to
show the time data indication
on the normal indications.
ON (normal value):
Displays.
OFF: Not display.
ID IND
Selects whether or not to
display the camera ID when
displaying color bars.
ON (normal value):
Displays.
OFF: Not display.
ID SET
Sets the camera ID (up to
eight characters, including
alphanumerics, symbols,
and spaces).
See “To set the camera ID”
on below.
Current camera ID
3
Press and turn the MENU dial to enter the desired
characters.
The displayed character changes as you turn the
dial.
4
Return to step
2
and repeat the text entry
procedure.
5
When you have finished entering the text, press
and turn the MENU dial to move the cursor to the
parenthesis position.
This clears the displayed menu and returns to the
normal indications.
Advanced menu page 7
PAGE7 (NEXT
m
$
PREV
m
4
)
m
EZ MODE : CUSTOM
a)
A.IRIS-AGC: F2.8
A.IRIS-AE : F16
AGC LIMIT : 12dB
EXIT MENU (YES
m
PUSH)
a) At shipping, the EZ MODE is set to STD.
Item
Settings
EZ MODE
When the EZ MODE button
has been set to EZ mode
ON, this selects whether or
not to change the settings of
other switches and menus to
the standard settings. (The
EZ mode function cannot be
used during remote
operation.)
STD (normal value):
Changes settings to
standard settings.
CUSTOM: Changes only
some settings to standard
settings.
For details of the settings
when STD or CUSTOM is
specified, see “EZ mode
settings” on next page.
A.IRIS-AGC
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
F1.4, F1.8, F2.8 (normal
value), F4, F5.6
A.IRIS-AE
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
F5.6 , F8, F11, F16 (normal
value)
AGC LIMIT
Sets an upper limit value for
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).
0 dB, 3 dB, 6 dB, 9 dB, 12
dB (normal value)
