Sony BRAVIA KDL-32V2000, Руководство по обслуживанию

Страница: 26 / 100

- 25 -
WAX2
RM-ED005
AD-Adjust RF Spec Spec.
Reference register name
S-REG: APL_LUMA TARGET_Y_RF±2
Service adjustments to this model can be performed using the
supplied remote Commander RM-ED005.
3. The following menu will then appear on the screen.
4. Move to the relevant command using the up or down arrow
buttons on the remote commander.
5. Press the right arrow button to enter into the required menu item.
6. Press the ‘Menu’ button on the remote commander to quit the
Service Mode when all adjustments have been completed.
Note :
• After carrying out the service adjustments, to prevent the
customer accessing the ‘Service Menu’ switch the TV set OFF
and then ON.
1. Turn on the power to the TV set and enter into the stand-by
mode.
2. Press the following sequence of buttons on the Remote
Commander.
SECTION 3
SET-UP ADJUSTMENTS
3-1. How to enter Service Mode
i+
5
+
(ON SCREEN (DIGIT 5) () (TV)
DISPLAY)
I/
TV
3-2-2. Y signal calibration1 adjustment for
terrestrial analog.
1. Input PAL colour bar 75%Y, 75%C via terrestrial input.
2. Send ECS_ADJUST_TCD3_CONT_RF command.
3. Read the value of S-REG:APL_LUMA via ECS. Confirming that
the value is within spec of the table below.
3-2-3. Set up of C signal calibration1 adjustment
for terrestrial analog.
1. Input PAL colour bar 75%Y, 75%C via terrestrial input.
2. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
3. Ensure noise reduction NR=3 (High), GAMMA_EN=0,
P4_CVD2_85=0.
3-2-1. Set up of AD calibration1 adjustment for
terrestrial analog.
The following adjustments are done via ECS.
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure noise reduction NR=3 (High), GAMMA_EN=0,
P4_CVD2_85=0.
3. Set the following registration items.
3-2. Signal Level Adjustment
㧜
㧞 㧟
㧠 㧡 㧢 㧣
6+6.'
5KIPCNNGXGNCFLWUVOGPV
65/
Screen Size 32" 40" 46"
TARGET_Y_RF(PAL) 165 165 165
ADJ_COLOR_Y_ATT(PAL) 128 128 128
ADJ_COLOR_PAL(PAL) 3 3 3