SonoSite MicroMaxx Скачать руководство пользователя страница 25

Страница: 25 / 98

Chapter 3:

System Overview

Peripherals

See the manufacturer’s specifications for the following peripherals.

Medical Grade

Black-and-white printer

Recommended sources for printer paper:

Contact Sony at

1-800-686-7669

www.sony.com/professional

to order supplies or to obtain the name and number of the local distributor.

Color printer

Video cassette recorder

Non-Medical Grade

Kensington Security Cable

Temperature, Pressure, and Humidity Limits

Note: The temperature, pressure, and humidity limits apply only to the ultrasound system and transducers.

Operating Limits: System

• 10–40°C (50–104°F), 15–95% R.H.
• 700 to 1060hPa (0.7 to 1.05 ATM)
Shipping/Storage Limits: System without Battery

• -35–65°C (-31–149°F), 15–95% R.H.
• 500 to 1060hPa (0.5 to 1.05 ATM)
Operating Limits: Battery

• 10–40°C (50–104°F), 15–95% R.H.
Shipping/Storage Limits: Battery

• -20–60°C (-4–140°F), 0–95% R.H.*
• 500 to 1060hPa (0.5 to 1.05 ATM)
* For storage longer than 30 days, store at or below room temperature.

Operating Limits: Transducer

• 10–40°C (50–104°F), 15–95% R.H.
Shipping/Storage Limits: Transducer

• -35–65°C (-31–149°F), 15–95% R.H.

Electrical

Power Supply Input: 100-240 VAC, 50/60 Hz, 1.2 A Max @ 100 VAC.

Power Supply Output (system on):

(1) 15 VDC, 2.7A Max (system)

(2) 12.6 VDC, 0.8A Max (battery charging)

Power Supply Output (system off ):

(1) 15 VDC, 2.0A Max (system)

(2) 12.6 VDC, 1.8A Max (battery charging)

Combined output not exceeding 52W.

Battery

6-cell, 11.25 VDC, 4.4 amp-hours, rechargeable lithium ion battery pack.

Run time is 2 hours or more, depending on imaging mode and display brightness.

Содержание MicroMaxx



































































































Результаты поиска

Содержание MicroMaxx

Отзывы:

Похожие инструкции для MicroMaxx

Бренды по названию

Популярные бренды

SonoSite MicroMaxx, Руководство по обслуживанию

Результаты поиска

Содержание MicroMaxx

Отзывы:

Похожие инструкции для MicroMaxx

Бренды по названию

Популярные бренды