manualshive.com logo in svg

SonoSite MicroMaxx, Руководство по обслуживанию, Страница: 52 / 98

Поделиться
Скачать
SonoSite MicroMaxx Скачать руководство пользователя страница 52

46

Chapter 4:

 Setup and Operation 

Upgrading Triple Transducer Connect (TTC)

Obtaining a License Key

A license key is required to update your system. It may be obtained by contacting SonoSite, Inc. Technical Support 
Department.

Figure 4.13 Transducer License Screen

At this point, the software upgrade process is complete, but the software is not yet licensed. 
The following section 

“Obtaining a License Key”

 explains how to license your system and 

transducer software.

Note: If you are upgrading additional transducers, it is recommended to upgrade all items before 
calling SonoSite Technical Support for your license keys. To postpone obtaining a license key, press 
Cancel from the on-screen menu.

Upgrade TTC

If the TTC requires an upgrade for the MicroMaxx system, the following message is displayed: “Do 
you want to upgrade the Triple Transducer Connect now?” If this message is displayed, perform 
the upgrade.

Select Yes to accept and No to cancel the upgrade.

• If you select Yes, the system presents you with the license update screen so that you may license 

the software. See 

“Obtaining a License Key” on page 46

 to license your software.

• If you select No, the system restarts.

Technical Support (USA, Canada)

1-877-657-8118

Technical Support fax:

1-425-951-6700

Technical Support e-mail:

[email protected]

SonoSite website:

www.sonosite.com

 and select Support

International Technical Support:

Contact your local representative or call (USA) +425-951-1330

European Service Center

+44-(0)1462-444-800
e-mail: [email protected]

Japan Service Center

+81-3-5304-5337
e-mail: [email protected]

Содержание MicroMaxx



































































































Отзывы:

Нет отзывов