SonoSite C1.9 PLUS, Руководство по обслуживанию

Страница: 37 / 98

Chapter 4: Setup and Operation 29
The system will operate on a fully-charged battery for 1.5 to 4 hours, depending
upon use. Ensure the battery is charged at all times to provide the longest possible
battery operation. You can set the
sleep delay and power delay to prolong battery
life.
When the system is not likely to be used for some time, to prevent total battery
discharge, remove the battery from the system.
To charge the battery:
CAUTION:
`
Charge batteries only when the ambient temperature is between 32° and 104°F (0°
and 40°C).
1. Connect the AC line cord of the AC power adapter to a hospital-grade electrical
outlet.
2. Connect the DC line cord of the AC power adapter to the power connector on
the system. (1) (Figure 4.6 and
Table 4.2 ).
3. Charge the battery until it is fully charged.
Note: It takes about three hours to charge a battery when the system is off.
4. Disconnect the system from AC power.
5. Turn the system on to check the battery charge.
Figure 4.6 System Connections
Table 4.2 System Connections
NUMBER FEATURE
1 DC line voltage connector
2 I/O connector
3 Print control connector for a recommended printer
4 Video out connector for a recommended VCR, printer, or external video monitor
1 2 3 4