User’s Guide
This document is the property of Sonostar Inc. Any unauthorized reproduction is prohibited.
Page
24
5.9 Green Close-Up Function
At any time during your round, press “
GREEN
” (left soft key) to get a close-up view
of the putting green. You will see the distances to the Front, Center and Back of the
green. Press the “
FULL
” (left soft key) to go back to the previous screen.
5.10 Mark Function
The Mark function is used to measure distance of each shot. After hitting a shot, press
the ‘
START
’ button and proceed to the ball. The distance figure stops after pressing
‘
END
’. The display then shows the distance of the actual shot.
The Mark Function can be used anytime, except when the ‘Green View’ function is
activated. This can be done in two ways:
1.
Press ‘
MARK
’ button (Right side key) directly.
2.
Select
MARK
Function icon on the ‘
MAIN
’ page.
To begin, press “
START
” (right soft key) at the point from where the shot is taken.
The screen will show ‘0’ on the display. When you move toward the ball position, the
yardage number will increase according to your location.
Important!
This function can only be activated
when there is GPS reception.
Important!
The user does not have to travel in a straight line to the ball. The distance shown on the
display is always the straight line distance from where the ‘
START
’ button was pressed.
Back
Center
Front
