10
Chapter 5 – Verification and Configuration Steps
Figure 9
Basic Configuration Steps—Windows Users
Listed below are the basic steps necessary to configure the
Twin10G T2E adapter for use with your computer.
1.
With the Twin10G T2E adapter connected to your
computer and 10GbE infrastructure, open the Network
and Sharing Center control panel
(Figure 9)
.
2.
Set up network connections by clicking “Set up a new
connection or network”.
You may also configure the Sonnet adapter’s settings using
Windows Device Manager. You may locate the device’s ports
in the Network adapters category, listed as Intel Ethernet
Controller X550 dual port network connections.
