112
GB
Decrease ( ):
1)Enables the adjustment of the temperature desired in Cooling and Heating modes
2) Each time the ( ), button is pressed, the temperature set decreases by 1ºC; by hold-
ing the button pressed, the temperature decreases continuously.
(6) Function display
The display shows the temperature and the set timer. When the temperature and timer
are set, the new temperature will be displayed for a few seconds, then the display
shows again the room temperature. This display detects also errors:
Problem
Cause
Solution
E1-E2
Defective temperature
sensor or PCB.
Contact the service centre.
E4
Tank full or plug not
correctly fitted.
Empty the tank. Check
that the plug is fitted
correctly into the socket.
Then press POWER button
.
(7) Speed button
Press this button when the appliance is on in order to set the fan speed in cooling mode.
High fan speed: the LED
HI
will switch on
Medium fan speed: the LED
MID
will switch on
Low fan speed: the LED
LO
will switch on
When the LED
AUTO
switches on the air conditioner regulates automatically the fan
speeds on the 3 possible levels. On the remote control there are three buttons:
High speed
Medium speed
Low speed
In heating mode the speed is automatically settled at the maximum value and in dehu-
midification mode at the minimum value.
Содержание FRESCO 700
