Sonnenkonig FRESCO 700, Руководство пользователя

Страница: 108 / 120

108
GB
6 Operating modes
1. Cooling mode
•
The first time it is turned on, the air conditioner will operate in Cooling mode with
the temperature set to 25ºC by default. The LED COOLING will switch on.
•
The temperature can be adjusted between 17° and 30°C.
•
In this way, each time the Power button is pressed, set and when switched back
on again, it will retain this setting.
•
In this way, fan speed can be adjusted (button ) Timer can be adjusted and also
“SLEEP function”.
•
For a quieter operation set the speed to minimum (LO).
2. Dehumidification mode
•
Press FUNC to select Dehumidification (DEHUMIDIFY). The LED will switch on.
•
The temperature is controlled by the electronic card and cannot be regulated.
•
In this way, each time the Power button is pressed, the unit switches off, the
appliance saves the settings and when switched back on again, it will retain them.
•
In this way it is possible to set the TIMER.
•
Fan speed is fixed to low (LO) and cannot be adjusted
NOTE
The air-conditioner does not cool the environment when operating as a dehumidifier.
When the appliance is used as a dehumidifier, the flexible hose must not be connected.
For maximum dehumidification efficiency, leave the rear discharge attachment free to
discharge directly into the environment. Dehumidification mode is recommended in
autumn and winter. If used in summer, it is better to leave the flexible hose attached, in
order to send the hot air outside rather than releasing it into the environment.
During dehumidification, it is better to ensure continuous drainage (see paragraph
entitled “HOW TO ELIMINATE CONDENSATION”).