Redbox RB-DSD8 User Handbook
21
SCI FOR RB
-DSD8
6
SCI FOR RB-DSD8
AES LEDs
– Indicate whether a digital signal is present and whether any sample rate
conversion is occuring.
SEL LEDs
- Indicate which input is currently being output for each channel set.
MODE LEDs
– Indicate which switching mode is currently set for each channel group.
Detection Disable
- Tick the box to disable silence detection for the specific channel.
Output Format
– Select an analogue or digital output
Additional Controls:
Switch Mode
– Select the switch mode for the selected channel pairs from Manual or
Automatic.
Input Selector
– Select whether Main or Backup is output for the selected channel pairs.
Link
– Link the channel groups together so that they switch together.
Detection Time
- The amount of time in seconds that silence is detected before a switch
over.
Default Time
– The amount of delay time used, in seconds, if all the delay DIPswitches are
placed in the OFF position.
Override Time
– The amount of delay time used, in seconds, if the override pin is held in a
latched position on the remote port.
Remote Start/Audio Fail
– Select the channel pair which will trigger the remote start/audio
fail pin on the remote connector.
Detection Level
– The level which is considered silence in dBFS.
Sample Rate
– Output sample rate when synchronisation mode is set to master.
Synchronisation Mode
– Select to synchronise from the internal clock or from an external
input.
Synchronisation From
– Select which external input is used to synchronise to.
Full Scale
– Select the full scale digit settings.
EXT SYNC LED
- Indicates which synchronisation mode is selected.
Remote LED
– Indicates whether the unit is being controlled remotely.
Power LEDs
– These indicate the state of the power supplies. There is one LED for each
power supply.
NB. All the above indicators and controls are replicas of the front panel indicators.
Please read the relevant sections in the manual to ascertain the meaning of the all
the different colours and settings.
