manualshive.com logo in svg

Sonifex Redbox RB-DSD8, Руководство пользователя

Поделиться
Скачать
Sonifex Redbox RB-DSD8 Скачать руководство пользователя страница 15

Redbox RB-DSD8 User Handbook

3

2

FR
ONT P

ANEL C

ONTR

OLS & INDIC

A

TORS

FRONT PANEL CONTROLS  

& INDICATORS

2. Front Panel Controls & Indicators

Fig 2-1: RB-DSD8 Status Buttons

Status Buttons

AUTO Button

This button is used to select automatic mode for all channels that are selected using the 
Link/Select buttons. This button deactivates MANUAL and SLAVE mode and illuminates 
green when selected. Press and hold the button for two seconds  to activate this mode. This 
mode can only be selected from one of the other modes if the main signal is present and 
above the threshold level. The button and the associated mode LED will flash to indicate 
these conditions have been met. To restore to main from backup in automatic mode push 
and hold the button for two seconds. This selection is the default for all channels.

MANUAL Button

This button is used to select manual mode for all channels that are currently selected. This 
button illuminates red when selected and deactivates the AUTO and SLAVE mode. Press 
and hold the button for two seconds to select this mode. The MAIN and BACKUP buttons 
can then be used to control which channel is selected.

SLAVE Button

This button is used to select the unit as slave controlled and is illuminated yellow. Pressing 
this button disables both the MANUAL button and the AUTO button.  Press and hold this 
button for two seconds to select this mode. Please note that SLAVE selection is applied 
across the whole unit. All channels will revert to which ever mode is used to deactivate the 
SLAVE mode.

MAIN Button

This button selects the main input as the output for the currently selected channels. The 
button illuminates green if MAIN input is selected. This selection is the default for all 
channels. Press and hold the button for 2 seconds to select the MAIN source. Please note 
that pressing and holding this button at any time will select MANUAL mode.

BACKUP Button

This button selects the backup input as the output for the currently selected channels. 
Press and hold the button for 2 seconds to select the BACKUP source. The button 
illuminates red if BACKUP input is selected. Please note that pressing and holding this 
button at any time will select MANUAL mode.

Содержание Redbox RB-DSD8









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды